The 2N Access Unit M is the ideal reader for offices. Its controller is built-in and all you need to connect and power the device is a single UTP cable. Thanks to its compact design, you can easily install the unit on a door frame. Choose from several versions – RFID, RFID combined with mobile access via Bluetooth, or RFID with a keypad, which is perfect for projects that require two-factor authentication. 
Slimline design
Fastest mobile access
Controller and reader in one
 
Features & Benefits
SLIMLINE DESIGN
The reader’s slimline design is ideal for installation on the door frame at the entrance to a meeting room. However, it will come in handy wherever you’re short on space.
 
FASTEST MOBILE ACCESS
With our WaveKey Bluetooth technology, users only need 0.3 of a second to gain access. What’s more, this is the securest method of access on the market.
 
CONTROLLER AND READER IN ONE
Don’t worry about looking for a place to put the controller plus save on cabling. Our reader has full smart technology built in. In addition, it works without the need to communicate with a server.
 
PERFECT FOR THE OFFICE OR OUTDOOR
The glass front panel will be scratch-free even after five years of daily use. With an IP55 protection coverage, you can install the reader outside. Despite all this, the units remain affordable.
 
QUICK INSTALLATION
Install the reader in 4 minutes. Drill three holes in the frame, feed through the UTP cable, connect the lock and screw it in place. It couldn’t be any quicker.
 
ENCRYPTED TWO-WAY COMMUNICATION
The reader securely communicates with the web interface, with 2N® Access Commander administration software and the 2N® Mobile Key mobile application.
 
Technical Parameters
Interfaces
Power supply:    PoE and/or 12 V/1 A DC
PoE:    802.3af (Class 0–12.95 W)
LAN:    10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling:    Cat-5e or better
Active switch output:    8 to 12 V DC/max 600 mA
Passive switch:    NO/NC contacts, up to 30 V/1 A AC/DC
Inputs:    2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch:    native part of the 2N Access Unit M
Audio:    buzzer, 1 W/8ohm
Supported protocols:    DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth
Version:    compatible with Bluetooth 5.0 LE
Range:    (short - typically up to 3m*, long - typically up to 10m*)
*distances should serve only as an approximate guide and may vary depending on the phone model and installation environment
Security:    RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:    up to 94.8 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies:    13.56 MHz variant
125 kHz and 13.56 MHz variant
125 kHz:    EM4100, EM4102
13.56 MHz:    ISO14443A, ISO14443B, NFC support
reads UID (CSN)
Touch Keypad
Technology:    capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability:    regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling:    configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical Properties
Cover:    tempered glass with durable plastic
Operating temperature:    -40°C to +60°C
Storage temperature:    -40°C to +70°C
Operating relative humidity:    10%-95% (non-condensing)
Dimensions (surface mounted):    50 (W) x 133 (H) x 27 (D) mm
Weight:    max 0.5 kg
Cover rating:    IP55 and IK07