top of page



ORDER NUMBER: 9160342/9160342-S (SECURED)

With the 2N® Access Unit RFID 13.56 MHz, you save on cabling and maintenance. No complicated wiring. Our reader is also a controller. Simply connect it to an IP network. You connect the lock, exit button and door contact to it directly. The reader also supports NFC, so it offers modern users access with their mobile phone instead of a card. 


Technical Parameters
Power supply:    PoE and/or 12 V/1 A DC
PoE:    802.3af (Class 0–12.95 W)
LAN:    10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling:    Cat-5e or better
Active switch output:    8 to 12 V DC/max 600 mA
Passive switch:    NO/NC contacts, up to 30 V/1 A AC/DC
Inputs:    2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch:    native part of the 2N Access Unit 2.0
Audio:    buzzer (97dBA)
Supported protocols:    DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies:    13.56 MHz
13.56 MHz:    ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object) - Secured version only
Mechanical Properties
Frame:    robust zinc cast frame with surface finish (nickel and black color)
Operating temperature:    -40°C to +60°C
Storage temperature:    -40°C to +70°C
Operating relative humidity:    10%-95% (non-condensing)
Dimensions:    Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:    max 0.8 kg
Cover rating:    IP54 and IK08

2N® Access Unit 2.0 RFID 13.56 MHZ

  • Email: I Phone +966114094246

    Contact form

bottom of page